Easton's Phenom catcher's gear lineup is built for an intuitive, comfortable fit with advanced protection ready to face higher levels of competition.
Helmet
High-Tensile Strength Wide-Angle Cage: High-tensile steel wiring shaped to a broad, high-visibility profile ensures confident protection without compromising visibility.
Ventilated ABS Shell: Wide, plentiful venting across the helmet helps to release excess heat and channel cool air in.
Tri-Density Padding: Dense, 3-layer foam blocks slow and disperse impacts across the helmet, keeping you comfortable and protected against stray balls and bats.
Biodri™: A soft-touch moisture-wicking lining tops each of the helmet's inner padding blocks, helping keep you cool through hot game days and long practices.
Certified to Meet NOCSAE Impact Protection Standards
Chest Protector
Segmented High-Density Padding: High-density impact foam blocks arranged into flexible, ergonomic segmentations help to maintain confident protection without compromising mobility.
Elastic Rear Strapping w/ Steel Waist Clip: Broad elastic strapping offers room for adjustment through the shoulders, secured with a quick and easy steel waist clip.
Adjustable Shoulder Cap: Fastened across an internal hook-and-loop patch, the Phenom chest protector makes adjusting shoulder height and width easy.
Certified to Meet NOCSAE Impact Protection Standards
Leg Guards
Multi-Hinge™ Design: Pliable hinge points above and below the knee help to keep positioning and quick knee-down throws feeling smooth.
Contoured Shin Wrapping: The Phenom leg guards wrap the shins with an ergonomic contour, helping to keep the legs centered and comfortable through the catcher's entire range of motion.
Flattened High-Grip Knee Plate: A tractive outer knee plate enhances long-term durability and gives knee down positioning a planted feel.
Removable Padding: Easily removable leg padding allows catchers to dial in their preferred fit and makes cleaning quick and easy.
Hat Size: 7 1/2 - 7 1/8 Head Circ: 23 1/2 - 22 3/8
MD
Hat Size: 7 1/2 - 7 1/8 Head Circ: 23 1/2 - 22 3/8
SM
Hat Size: 7 1/8 - 6 1/2 Head Circ: 22 3/8 - 22 1/2
Chest Protector
LG
Age: 15+ Torso: 17
MD
Age: 12 - 15 Torso: 16
SM
Age: 9 - 12 Torso: 15
Leg Guards
LG
Age: 15+ Leg: 16.5
MD
Age: 12 - 15 Leg: 15.5
SM
Age: 9 - 12 Leg: 14
Measurements:
Head Circumference: If hat size is not known, measure an inch above the brow line around the widest part of the head.
Torso Length: While standing, measure from the bottom of the collarbone/throat down to the belly button.
Lower Leg: While standing, measure from the center of the knee cap down to the top of the foot.
The information in this fit chart was provided by Easton (Rawlings Sporting Goods Company), intended as a general fitting guideline. This guide cannot guarantee a perfect fit, as equipment manufacturing and individual preferences can vary. For more in-depth guidance, visit How to Size a Catcher’s Mask, How to Size a Catcher’s Chest Protector, How to Size a Catcher’s Shin Guards, or contact our customer support team.
Rawlings Sporting Goods Company, Inc. (together with its affiliates and brands, including Easton, Miken, and Worth, collectively “Rawlings”) prides itself on the quality and performance of its products, which meet, and often exceed, industry quality and durability criteria or guidelines. However, all materials are subject to fatigue and possible breakdown over time.
For certain products within its family of brands, Rawlings offers a limited warranty against defects in materials or workmanship as outlined below (the “Limited Warranty”). For any products not listed herein, the products are sold on an “as-is” or “without warranty” basis. Note that this Limited Warranty is available for products customized directly through Rawlings to the extent that there is a manufacturer’s defect.
This Limited Warranty applies to products purchased after the last revision date set forth herein. Purchase and/or use of any product identified herein will be deemed an acknowledgement and acceptance of this Limited Warranty.
This Limited Warranty only covers products purchased from authorized Rawlings, Easton, Miken, and Worth dealers with a copy of the original sales receipt.
General Exclusions
This Limited Warranty does not cover:
Normal wear and tear
Cosmetic damage (e.g., discoloration, color fastness, or natural fading of colors, minor scratches, and paint chips from normal handling, etc.), burns, or abrasions
Products that have been damaged due to accident, negligence, or excessive collision
Products purchased from non-authorized Rawlings dealers or individual resellers
Products purchased at auction or via third party marketplace websites (unless sellers are authorized Rawlings dealers)
Products found to have a usage history that is inconsistent with the claimed history
Products that are not accompanied by an original sales receipt or for which the supplied proof of purchase is inconsistent with the product in the claim
Products that have been transferred from the original purchaser
Products that have been physically altered (including the removal or defacement of a serial number), doctored, abused, mistreated, or tampered with in any manner whatsoever or used without observing the care instructions. Any suspected alteration of a product will nullify this Limited Warranty.
Products that have been customized after-market by a third party
Products that have been improperly cared for, maintained, or stored (e.g., exposed to moisture, flooding, fire, electrical problems, pet chewing, etc.), not at the fault of Rawlings
Stolen or lost items
Products on which repair attempts have been made by anyone other than Rawlings
Products that have been damaged or modified through the use of parts or accessories that were not certified or approved by Rawlings (e.g., hardware modifications, etc.)
Counterfeit products
Products received as a gift without proof of original sales receipt
Products won through a promotion (e.g., sweepstakes, raffle, contest, etc.)
Products that have been damaged or products with defects discovered after the Warranty Period
Products purchased “as-is”, “used”, “without warranty”, or as “demo” products
1 Year: Aluminum or Composite Bats, Baseball and Softball Fielding Gloves, Protective Equipment, Helmets, Bases, Home Plates, Pitching Rubbers
90 Days: Baseballs and Softballs, Bags
60 Days: Batting Gloves and Sliding Mitts, Clothing or Apparel
*Please note: Warranty information provided by Rawlings Sporting Goods Company, Inc. The above stated warranty is not inclusive to all Rawlings Sporting Goods warranty terms, stipulations, guidelines, or exclusions. For complete Rawlings Sporting Goods Company warranty information please refer to www.rawlings.com/support-warranty. Warranty coverage and remedies are solely determined by Rawlings Sporting Goods Company. Should you need to make a claim under the above stated warranty, please contact our customer service team.
@Recommendation.Title by @Recommendation.Brand$@Recommendation.Price@Recommendation.MSRP